带轮注塑模设计说明书.docVIP

摘 要 斜滑块分型和推出机构是带轮槽塑件注塑模结构设计的重点。本文分析了带轮塑件的工艺特性，给出了实用的注塑模结构，介绍了注塑模各系统的结构设计，论述了模具的工作原理。该模具利用开模制动装置和斜滑块分型推出机构，完成塑件的分型和脱模，保证产品的生产质量。模具结构紧凑，推出可靠，安装维修操作方便，成型塑件质量好，生产效率高。 关键词：带轮；注塑模;斜滑块；分型；制动装置 Abstract The key point of the structure design of plastic injection mould with V-belt pulley groove is the parting(i.e,side action) and eyecting mechanism.Based on the analysis of the technologacical characteristics of plastic pulley,a practical mould structure is presented,involving the design of components of mold and their working principle.To ensure the quality product,the side pulls and demoulding are accomplished by use of the arrester,which prevents the side action of cavity splits at from the beginning of mould opening to a certain travel,as well as by use of angle slide ejecting device.The mould is compact in structure,credible in push-out and easy in installing,maintaining and operating,The quality of product is good and the production effciency is high. Key words:pulley;injection mould;Angled-lift splits;Parting;Arrester device 目录 TOC \o 1-3 \h \u HYPERLINK \l _Toc19319 摘 要 PAGEREF _Toc19319 I HYPERLINK \l _Toc21851 Abstract PAGEREF _Toc21851 II HYPERLINK \l _Toc17872 第一章 绪 论 PAGEREF _Toc17872 1 HYPERLINK \l _Toc31679 1.1 模具的工业地位 PAGEREF _Toc31679 1 HYPERLINK \l _Toc28409 1.2 模具的发展趋势 PAGEREF _Toc28409 2 HYPERLINK \l _Toc5480 1.3 模具设计对制造能力的促进作用 PAGEREF _Toc5480 3 HYPERLINK \l _Toc9266 第二章 塑件成型工艺性分析 PAGEREF _Toc9266 4 HYPERLINK \l _Toc10817 2.1 塑件的分析 PAGEREF _Toc10817 5 HYPERLINK \l _Toc5822 2.1.1 外形尺寸 PAGEREF _Toc5822 5 HYPERLINK \l _Toc21371 2.1.2 精度等级 PAGEREF _Toc21371 5 HYPERLINK \l _Toc23578 2.1.3 脱模斜度 PAGEREF _Toc23578 5 HYPERLINK \l _Toc30052 2.2 ABS的性能分析 PAGEREF _Toc30052 5 HYPERLINK \l _Toc257 2.2.1 使用性能 PAGEREF _Toc257 5 HYPERLINK \l _Toc17646 2.2.2 成型性能 PAGEREF _Toc17646 5 HYPERLINK \l _Toc15693 2.2.3 ABS的主要性能指标 PAGEREF _Toc15693 6 HYPERLINK \l _Toc24175 2.3 ABS的应用 PAGEREF _Toc24175 6 HYPERLINK \l _Toc6205 2.4 ABS的注射成型过程及工