压缩机虚拟样机仿真分析..doc

PAGE 本科毕业设计(论文) 题目：基于Pro/E的涡旋压缩机虚拟样机设计 教学单位： 机电工程系 专 业： 机械设计制造及其自动化 学 号： 0912010101 姓 名： 岳云欢 指导教师： 邱海飞 马志奇 2013年 5月 PAGE 31 摘 要 涡旋压缩机是近几年来发展迅速的一种新型压缩机械，具有效率高、能耗小、 结构紧凑、运行平稳、寿命长、气源清洁等特点。但是涡旋压缩机的设计目前仍处于传统的设计阶段，为提高涡旋压缩机的设计效率，保证其运转性能，本文突破传统的二维设计方法，采用虚拟设计技术来探索涡旋压缩机的运动全过程。 本文涡旋压缩机为研究对象，通过参考国内外相关资料了解其结构及工作原理，运用Pro/E软件对其进行三维实体建模、虚拟装配以及运动学仿真分析。使用ANSYS对关键零部件进行模态分析，可以预测结构的实际振动响应，为涡旋压缩机的动力学特性改进提供技术参考和依据。 关键词：涡旋压缩机；虚拟装配；运动仿真；模态分析；Pro/E Abstract Scroll compressor is a new type compressor has developed rapidly in recent years, with high efficiency, low energy consumption, Compact structure, smooth operation, long service life, air cleaning characteristics. But the design of scroll compressor is still in the traditional design stage, in order to improve the design efficiency of scroll compressor, guarantee its working performance; this paper breaks through the traditional two-dimensional design method, the whole process of using virtual design technology to explore the movement of scroll compressor. In this paper, the scroll compressor as the research object, by reference to the relevant information to understand the structure and working principle, analysis of 3D solid modeling software Pro/E, the virtual assembly and kinematics simulation application. The use of ANSYS modal analysis of key parts and components, can predict the actual vibration response of structure improvement, to provide technical reference and basis for dynamic characteristics of scroll compressor. Keywords: scroll compressor; virtual assembly; motion simulation; modal analysis;Pro/E 目 录 TOC \o 1-3 \u 第1章 绪论 PAGEREF _Toc356142287 \h 1 1.1涡旋压缩机的研究背景 PAGEREF _Toc356142288 \h 1 1.2 涡旋压缩机国内外研究现状 PAGEREF _Toc356142289 \h 1 1.3主要研究内容 PAGEREF _Toc356142290 \h 2 1.3.1研究目的 PAGEREF _Toc356142291 \h 2 1.3.2主要研究内容 PAGEREF _Toc356142292 \h 2 1.3.3研究意义 PAGEREF _Toc356142293 \h 3 第2章 涡旋压缩机的结构与工作原理 PAGEREF _Toc356142294 \h 4 2.1涡旋压缩机的基本结构 PAGEREF _Toc3561