发光二极体LED透镜之成形收缩对其光学品质之影响-模具工程系.PDF

Effect of the Injection Molding Shrinkage to Optical Quality for Light Emitting Diode Lens C.-C. Huang Professor, Department of Mold and Die Engineering, National Kaohsiung University of Applied Sciences M.-C. Hsuh Graduate student, Department of Mold and Die Engineering, National Kaohsiung University of Applied Sciences (Light Emitting Diode Lens LED Lens) (Diffuse Lens) LED LED 15 60 LED 75 8 Abstract In recent years the lens made by plastic gradually and also developed on high-accuracy trend. The main optical quality was decided by lens appearance; therefore how to conquer the shrinkage phenomenon of plastic molding will be the key point of enhance the optical quality of lens. This research was using two Light Emitting Diode Lens, one was Diffuse Lens and another was Focus Lens; then discusses the influence of molding parameter to lens shrinkage. Molding shrinkage including the change of surface outline curvature and internal part shrinkage hole, Optical quality mainly me an the radiate angle and intensity which lens. In this paper we used optical software to proceed optical analyze and design of lens appearance, and using injection molding to manufacture lens