- 2
- 0
- 约1.6万字
- 约 5页
- 2018-12-29 发布于湖北
- 举报
黄 怡 ,等 :支撑布置方式对多高层钢结构抗震性能的影响分析
支撑布置方式对多高层钢结构抗震性能的影响分析
黄 怡 王元清 石永久
(清华大学 结构工程和振动教育部重点实验室 北京 100084)
摘 要 框架支撑体系作为多高层钢结构的一种结构形式被广泛采用。竖向支撑的布置方式对于结构的抗震性
( ) (
能有较大的影响。建立典型的多、高层框架模型 6 层和 18 层 ,通过有限元软件 ANSYS 的抗震性能分析 模态分
)
析、谱分析、时程分析 ,循环荷载分析 ,对比分析了动力荷载作用下 ,不同的支撑布置对结构的内力、变形以及耗能
能力的影响。并在计算分析的基础上 ,探讨了支撑布置的影响规律。
关键词 支撑布置 抗震性能 时程分析
ANALYSIS OF SEISMIC BEHAVIORS OF MULTISTOREY AND HIGHRISE
STEEL STRUCTURES WITH DIFFERENT LAYOUT OF BRACES
Huang Yi Wang Yuanqing Shi Yongjiu
( The Key Laboratory of Structure Engineering and Vibration of Ministry of Education , Tsinghua University Beijin g 100084)
ABSTRACT The braced frame system is widely adopted in multistorey and highrise steel structures nowadays The
layout of vertical braces will affect the mechanical performance of the structure to some extent Typical models of multi
storey building (6storey) and highrise building ( 18storey) are set up , whose seismic properties are analyzed (including
modal analysis , response spectrum analysis , timehistory analysis and cyclic load analysis) by finite element software
ANSYS Through comparison , the effect of layout of braces to internal force , displacement , energydissipating capability
is studied On the basis of calculation and analysis , the influencing law of brace layout forms on seismic behavior is also
explored
KEY WORDS brace layout seismic behaviors timehistory analysis
由于纯框架体系刚度小 ,通常 6 层以上的钢框
架结构建筑 ,层间位移起控制作用 ,增加支撑体系 ,
可提高结构整体刚度 ,减少梁、柱用钢量 ,梁、柱节点
承受的弯矩小 ,构造也相对简单。因而框架 - 支撑
体系在中高层钢结构建筑中得到了广泛应用。
结构中布置竖向支撑
原创力文档

文档评论(0)