以三次元量测系统进行破损古物之曲面重建.PDFVIP

量 行 年六 量行 不 年 來 量 來量 數 料 利 量 料 不行數量 若 離量 量 料 率 料 不利 量略量 料 度 立 量 料量 離 料量 量略 不 念 度 離量 量 Using the Coordinate Measurement System to Reconstruct Destroyed Antiques Surface Jung-Hui Chao* Yu-Min Chang** * Lecturer Department of Mechanical Engineering ** Professor Department of Civil Engineering Abstract The ancient building appearance has been showing a tendency of free-form surfaces, which is composed of its perpetually irregular variations. It’s very difficult to represent the free-form surfaces in a traditional engineering drawing due to the uncertainty of dimension caused by the irregular variations. In order to solve this problem, the coordinate measurement system has been applied to digitize its curve surface into data points. And then, construct a geometric model by using a computer aided design (CAD) system basing on the data points to supplement the deficiency of traditional engineering drawing. In the measurement strategy, the prototype has been scanned across a four-sided patch with a fixed gauge. However, this method tends to pick up redundant points in the relatively flat regions of the surface, and to loss the critical points in the high curvature regions of the surface, which are disadvantages to surface rebuild. In this study, a measurement strategy through the rule of selecting irregular points is proposed to rebuild the surface by the digitizing data points. These data points can be fitted in with a B-spline surface by the CAD system after the processes of classify