弯剪共同作用下钢筋混凝土梁承载力计算方法的研究-中国科技论文在线.PDFVIP

中国科技论文在线 29 12 Vol.29 No.12 2012 12 Dec. 2012 ENGINEERING MECHANICS 302 1000-4750(2012)12-0302-05 ( 410082) GB50010-2002() GB50068-2001 TU375 A doi: 10.6052/j.issn.1000-4750.2011.03.0100 RESEARCH OF CALCULATED METHOD OF BEARING CAPACITY FOR REINFORCED CONCRETE MEMBER UNDER SHEAR AND BENDING HUANG Liang , XU Zi-peng , LU Yi-qiu (College of Civil Engineering, Hunan University, Changsha 410082, China) Abstract: The experiment of reinforced concrete (RC) beams under a combined action of shear and bending indicated that there is a Moment-Shear correlation. The capacity of RC shear-bending components is calculated separately according to the methods of pure shear and bending in GB50010-2002, which will cause low reliability and the demand of GB50068-2001 cannot be satisfied through analysis of existing test data, a modified formula based on 1/4 arc and its calculation method is proposed. The correlation of shear and bending actions is considered in this formula, which have a definite physical meaning. Results show that the computing model of the modified formula is more accurate and its reliability can meet approximately the demand of GB50068-2001. Key words: reinforced concrete beams; capacity of flexural; capacity of shear; correlation; reliability; calculation method Elfren L [2] [1]