《高耐磨铜合金套类零件离心浇铸机设计》-毕业论文.DOCVIP

高耐磨铜合金套类零件离心浇铸机设计 摘 要 锡青铜是在工业中最常用的一种青铜，机械性能中的强度、塑性很好，尤其是其塑性可与钢相媲美，优良的化学稳定性、高致密性以及高耐湿摩擦性，因而被广泛用来生产耐腐蚀、耐高压和耐湿摩擦的各种零件。 本文着重叙述铜合金离心铸造。包括高耐磨铜合金套类零件浇铸工艺分析，模具设计，离心浇铸机原理设计，机构与结构设计。通过本次的毕业设计，使我掌握了设计一套机械设备的工艺流程，并且让我对大学里学的科目，无论是专业课还是基础课，都从头到尾的温习巩固了一遍，对各类手册的用法是从新熟悉了。毕业设计也就相当于设计一种产品，是我们这些毕业生步入社会的过度过程，对以后适应工作有着重要的意义。 离心铸造是一项非常先进的技术。虽然现在铸造领域所占的比重很小，但是随着社会的发展，我相信离心铸造将会在很多方面取代一些原始的铸造方法。当然离心铸造还有许多要完善的地方。就需要我们未来的研究中去完善它。 关键词：铜合金；耐磨；轴承；铸造；工艺；模具 Design of centrifugal caster of the most wear-resistant Cu-alloy cylinder parts Abstract Bronze is one of the most commonly used bronze in industry ,the mechanical properties of strength, good plastic, particularly its steel and plastic can be comparable to steel.Fine chemical stability, high density and high humidfastness friction, which is widely used in the production of corrosion-resistant, resistant to high pressure and friction humidfastness the various parts.  This article focuses on the copper alloy centrifugal casting. Including the high wear-resistant copper alloy sets of parts casting process analysis, mold design, centrifugal casting machine design principles, institutions and structural design. Through the graduation design, I have had to design a process of mechanical equipment, and let me to the University of subjects, whether specialized or basic courses, from start to finish the study reinforces once again, and is familiar with all types of manual the new usage. Graduate design also equivalent to design a product, we are of these graduates into the community over the process, to work in the future is of important significance. Centrifugal casting is a very advanced technology. Although the proportion of the now casting is small， but with the development of society， I believe that the centrifugal casting will be replaced in many ways， some of the original casting method. Of course there are many centrifugal casting place to improve. We need to study in the future to improve it. Keywords：Cu-alloy; wear-resistant; Bearing;