基于差分链码曲率的转炉火焰边界弯曲度计算-计算机工程与应用.PDFVIP

Computer Engineering and Applications 计算机工程与应用 2013 ，49 （7 ） 171 基于差分链码曲率的转炉火焰边界弯曲度计算 1 2 3 3 刘 辉 ，张云生 ，张印辉 ，何自芬 1 2 3 3 LIU Hui , ZHANG Yunsheng , ZHANG Yinhui , HE Zifen 1.昆明理工大学 冶金与能源工程学院，昆明 650093 2.昆明理工大学 信息工程与自动化学院，昆明 650051 3.昆明理工大学 机电工程学院，昆明 650093 1.Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093, China 2.Faculty of Information Engineering and Automation, Kunming University of Science and Technology, Kunming 650051, China 3.Faculty of Mechanical and Electrical Engineering, Kunming University of Science and Technology, Kunming 650093, China LIU Hui, ZHANG Yunsheng, ZHANG Yinhui, et al. Curvature computing of BOF flame boundary based on differential chain code. Computer Engineering and Applications, 2013, 49 （7 ）：171-175. Abstract ：The carbon content in BOF can be characterized by the boundary curvature of flame image, so it is important to calcu- late the boundary curvature accurately for the end point forecast based on the method of flame image analysis. A calculation method of boundary curvature based on differential chain code is proposed. The boundary curvature formula of flame image based on differential chain code is defined. For the effectiveness of the formula, the segmentation, tagging, binarization, mor- phology edge extraction and other pre-treatment are done to the original images. the flame boundary is rebuilt by polygon approxi- mation aimed to overcome the shortcomings of curvature calculation using differential chain code. Experimental results show that this method has a better distinguish characteristics of the different stages of blowing than the methods of circular or image skeleton curvature measurement. Also this method has a good calculation speed, so it ha