《基于UG的变速箱设计及CAM技术研究》-毕业论文设计（学术）.docVIP

l l 摘 要 现今，机械行业广泛采用CAD/CAM技术，并通过数控机床进行加工，大大缩短了产品的开发和制造周期，提高了产品的技术含量，降低了成本。 本论文中详细的阐述了变速箱的三维建模和数控编程过程，应用UG实现了零件的三维建模，在UG环境中进行了数控仿真加工，并生成了NC仿真加工程序。 论文共分四个部分，在第一部分简单的介绍了CAD/CAM技术；第二部详细介绍了基于UG的三维实体建模；第三部分详细介绍了基于UG的数控加工技术；第四部分讲述了经济性分析。 本课题通过对变速箱箱体零件设计加工过程的分析，以UG软件为基础，对变速箱箱体进行了设计，并对其进行了加工工艺分析，同时运用UG软件对其进行了数控加工，实现了从设计到生产的一体化，对实际生产有一定的指导意义。 关键词：CAD/CAM；变速箱；三维建模；数控加工；仿真模拟；NC代码 Gearbox design based on UG and CAM technology Abstract At present， the machinery industry widely used CAD / CAM technology and the numerical control machine tool for machining through the process, greatly reducing the product development and manufacturing cycle,improving the technology of products, and to reduce the cost. Paper describes in detail the transmission of three-dimensional modeling and numerical control programming. The application of UG realizes three-dimensional modeling of parts in UG CNC simulation environment for the conduct of the process, and generates the NC machining simulation program. Thesis is divided into five parts. In the first part introduces CAD/CAM briefly; The second section details the three-dimensional solid modeling; The third section details based on UG CNC machining technology; The fourth section describes the economic analysis. This topic through parts of gearbox design process analysis to UG software based on the transmission box was designed, and its analysis of the machining process, while the use of UG software from CNC processing to achieve the integration from design to production, actual production has some significance. Keywords : CAD/CAM ; gearbox ; three-dimensional modeling ; CNC Machining ; Processing simulation ; NC code ; 目录 TOC \o 1-3 \h \u HYPERLINK \l _Toc32660 1 CAD/CAM技术在产品制造中的应用 PAGEREF _Toc32660 1 HYPERLINK \l _Toc13685 1.1 CAD/CAM技术概述 PAGEREF _Toc13685 1 HYPERLINK \l _Toc20694 1.1.1 CAD/CAM技术的基本概念 PAGEREF _Toc20694 1 HYPERLINK \l _Toc30429 1.1.2 CAD/CAM技术的发展历程 PAGEREF _Toc30429 2 HYPERLINK \l _Toc20154 1.