基于HOOPS的协同装配系统研究与实现-工业工程专业论文.docxVIP

Abstract Assembly of product is jointly developed by the cross-organizational, geographical distributed, and multi-disciplines teams under the competitive economy environment and fast development of Internet technology. Collaborative assembly is a promising paradigm, in which the performance of product is thoroughly considered and the designers from different groups can work collaboratively. This advanced approach can reduce the time and cost spending on the product development, as well as improve the quality of product. This thesis focuses on collaborative assembly and its related key techniques. Firstly, the display technology of 3D model based on HOOPS Bridge and interface exchanging are studied. The components and operation mechanism of HOOPS are introduced. A system framework for collaborative assembly is presented. Secondly, assembly model of function is proposed for assembly sequence planning.An assembly cost difficulty criteria is yielded. Based on the proposed assembly sequence planning model,PSO is adopted to conduct the assembly sequence planning. The assembly sequence is optimized. Thirdly, interference inspection is studied.Packing arithmetic optimizes interference,and improves efficiency of interference inspection.Three conflicts are sloved. Efficiency of assembly is improved. Finally, the conclusion and further research are presented. Keywords: Collaborative Design，Collaborative Assembly, Interference Inspect,. Collision Manage 目 录 摘 要 ................................................................................................................ I Abstract................................................................................................................II 1 绪论 1.1 课题的来源、目的及意义 ........................................................................(1) 1.2 协同装配设计国内外研究现状 ................................................................(2) 1.3 本文的主要工作 ......................................................................................(10)