基于IEC61850的GOOSE通信及仿真研究-电机与电器专业论文.docxVIP

基于IEC61 基于IEC61 850的GOOSE通信及仿真研究 The Research on G00SE Communication and Simulation Based on IEC61850 Abstract The substation is a critical node in也e power system．With the development of sensor technology，computer science and network，hard wiring for information exchange between substation equipment is gradually replaced by Ethemet connection．According to IEC6 1 850， generic object oriented substation event(GOOSE)is an effective way to transfer key control information，as trip and locking，through broadcast．Therefore，implementation of GOOSE communication which could satisfy the need ofreal time and reliability were brought into sharp focus． This study is committed to the realization of GOOSE communication according to IEC6 1 850 protocol and analysis of the factors that affect its real time performance based on OPNET．First of all，the application of IEC6 1 850 protocol，GOOSE communication and the application of OPNET in power system are illustrated．Then，GOOSE communication are described in several aspects：the structure，mapping，retransmission mechanism，frame structure and coding．On the basis of GOOSE communication theory，GOOSE message sending and parsing program are developed on PC using WinpCap，which could act as GOOSE communication test platform afterwards． A GOOSE communication system based on ARM kernel embedded microprocessor STM32F407VG and physical layer chip DP83 848VYB is presented．After analyzing the hardware requirements of GOOSE communication，the selection and architecture design of hardware are described．Based on the requirement of GOOSE communication。也e initialization and configuration process are explained on the hardware platform．According to the GOOSE requirements of event trigger and retransmission mechanism，the software design of message sending part is presented．And the software design ofmessage receiving part is presented based on frame structure and parameter definition of G00SE message． Test platform is built to test the GOOSE communication syste