基于零序电压柔性控制的配电网铁磁谐振抑制方法.PDFVIP

35 7 Vol.35 No.7 Apr.5, 2015 1666 2015 4 5 Proceedings of the CSEE ©2015 Chin.Soc.for Elec.Eng. DOI 10.13334/j.0258-8013.pcsee.2015.07.014 0258-8013 (2015) 07-1666-08 TM 77 (() 410114) Zero-sequence Voltage Flexible Control Based Ferroresonance Suppressing Method for Distribution Networks ZENG Xiangjun, YANG Xiangui, WANG Wen, FAN Bishuang (Hunan Province Key Laboratory of Smart Grids Operation and Control, Changsha University of Science and Technology, Changsha 410114, Hunan Province, China) ABSTRACT: Middle low voltage power system can emerge 0 over-voltage due to ferroresonance caused by the electromagnetic voltage transformer saturation. This paper proposed a ferroresonance suppression method based on the (voltage transformerTV) flexible control of zero-sequence voltage. In this method, a TV zero-sequence current is injected into the power system by an TVTV active inverter, which absorbs the zero-sequence transient energy and releases the extra charge of the capacitors between [1-2] power lines and the ground, thus ultimately eliminates the ferroresonance. The suppression of sub-harmonic ferroresonance, fundamental ferroresonance and high- frequency ferroresonance was simulated respectively, which showed that with the proposed method, the distribution system can be forced out from ferromagnetic resonance state and the zero-sequence voltage can be restrained to zero with only a short-time injection of zero-sequence current.