机械设计及自动化外文翻译资料.docVIP

山东建筑大学毕业设计 PAGE PAGE 2 本科毕业设计 外文文献及译文 文献、资料题目：The Impact Analysis of Stamping Process Factors Based on Dynaform 文献、资料来源：Advanced Materials Research 文献、资料发表日期： 2013 院 （部）： 机电工程学院 专 业： 机械工程及自动化 班 级： 机械 成型方向 姓 名： 学 号： 指导教师： 翻译日期： 外文文献: The Impact Analysis of Stamping Process Factors Based on Dynaform Abstract Combining with practical needs in production, it carried out the numerical simulation analysis of automobile beam stamping forming process based on Dynaform in this paper. According to quality evaluation index of forming parts, it analyzed the effect of variation of blank holder force,the stamping speed, the coefficient of friction and draw bead on stamping quality. It forecast the quality problems happened in forming process, which provides the theoretical basis for design of stamping process and mold. Keywords: stamping forming, numerical simulation, process factors, impact analysis, Dynaform Introduction Due to high production efficiency, low processing costs and stability of product dimensional accuracy, sheet metal stamping is widely used in the field of automobile manufacturing [1-3].Combining with practical needs in production, it carried out the numerical simulation analysis of automobile beam stamping forming process based on Dynaform in this paper, and analyzed the effect of manufacturing process factors on stamping quality, and achieved the aim of optimizing stamping process parameters and reducing mold trial number. Establishment of finite element model According to technical requirements of automobile beam putted forward by automobile manufacturer and stamping processes, the three-dimensional model was bulit with craft supplement which meets the numerical simulation requirements using UG. With importing the three-dimensional model into Dynaform, the model was mesh by quadrilateral using the adaptive grid technology. Then check and repair the finite element model. The finite element model of punch and die was esta