福斯气动执行机构.pdfVIP

FlowAct TM High Performance Actuator 2 125 - 3000 cm , 0,25 - 60 kN Application The System For installation on control valves, direct or reverse action, for controlled or on/off operation. Product features • Multi-spring compact design Actuator • Radial spring arrangement permits a low mounting height • Low volume between diaphragm and case gives fast response times • Strong operating force by permissi- ble pressure supply of 6 bar / 87 psig Pneumatic Actuator with integral pipework - • Permissible ambient temperature Stem extends by air failure ( s ) - 40 up to 80°C / - 40 up to 176°F • Stable guided stem • Fabric-reinforced roll-type dia- phragm with minimum area variation due to stem position on loss in ope- rating force for various stroke posi- tions - linearity is retained • Stem bushing requires no mainte- O-Rings nance • Stable yoke in spheroidal cast-iron • Central mounting on the control valve • Yoke and stem coupling with moun- ting surfaces according to NAMUR (DIN IEC 65 B CO) • Top resp. lateral mounted hand wheel Lock nut Operation The diaphragm is actuated by the control signal. The actuator stem mo- ves as soon as the diaphragm force Yoke exceeds the counterforces of the springs. There are two operational modes depending on the arrangement of the spring package: 1. Stem extends by air fa