基于flac3d的深基坑桩锚支护结构的分析研究-岩土工程专业论文.docxVIP

万方数据 万方数据 Abstract With the development of economy and society，High-rise building and subway project come out in large numbers, Deep Excavation also will be large numbers. Deep excavation is a very comprehensive and complex systems engineering, Its support have various ways. Pile anchor retaining structure is one of common of deep foundation pit, because of its low cost, easy construction, a wide range of advantages being promoted. This article take an engineering examples which is Shenzhen a big summer of bored prestressed bolting deep foundation as the background, use the finite difference software FLAD3D create models, turkey deformation during excavation and supporting structure body to simulate, and analyze with the on-site monitoring data , and draw some useful conclusions. This article draw the following conclusions: FLAC3D numerical simulation method for conditions of pit construction dynamic simulation are reasonable and effective, the results of Engineering simulation closer to the actual situation. with earthwork excavation ,the horizontal displacement of Supporting Pile Top population is increasing. The effect of Prestressed anchor for restrainting the development of the horizontal displacement on the top of the pile is remarkable. With excavation horizontal displacement of deep soil increase. Available deep horizontal displacement of soil sphere of influence to determining the length of supporting piles is or not reasonable. (4) After Prestressed anchor locked, there will be a small amount of prestressing loss in a short time . Imposed under an anchor will reduce axial force on the anchor. This is because next working together to help anchor the anchor share some of the earth pressure. with the pile of Sway, Anchor axial force growd trend. Prestressed anchor in the soil mainly from tension effect, This is reflected in freedom of expression basicly constant axial force,anchoring the tail section of the axial force to decrease continuously.The axial force