基于cf接口的便携式数据采集系统-微电子学与固体电子学专业论文.docxVIP

AbstractTitle：PORTABLE Abstract Title：PORTABLE DAl。A ACQUISITl0N SYSTEM BASED ON COMPACTFLASH Majon MicroeIectronics and Solid Electronics Name：Yaowu GAO Signature：l釜型：垒竺D Supervisor：Prof．Yong GAO Signat叭：鲤兹纩 Associate prof．Yuan YANG Signat叭：垫些 Abstract A kind ofportable data acquisition(DAQ)system based on CompactFlash(CF)interface is introduced,Programmable Logic Device(PLD)is used as CF interface controller and DAQ controller：CF interface controller transfers data bctwc层n client and host,DAQ controller selects input range and controls A／D conversion．Host accesses clienfs data across CF interface， sends instructions to client such as range select word and DAQ parameter,data are sent to host in interrupt mode and then processed．Data processor software on the host can be modified easily to suit different condition,which is the biggest advantage ofthis l【ind ofsystem． Most CF-Based designs use special chip as interface controller currently,logic function is implemented by FPGA／DSP etc．This Multi·Chip scheme is easy to build,but is of higher system cost and power consumption．By reading CompactFlash specification,a CF card side interface based on PLD with memory mode and FO mode is designed，on which DAQ system is designed．Compared to traditional designs based on special interface chips，this design has more flexibility,lower system cost and power consumption．Furthermore，PLD-based CF card side interface introduced in this designed is universal，many other kinds of CF-based portable I／O device can benefit fTom this design． PLD used as logic controller in DAQ system finished in the project was implemented on both FPGA and CPLD．After the complement ofhardwaro and software．tests arc taken to DAQ system．Results of experiment show the successful implementation of data acquisition, processing，display and control，and DAQ system based on CPLD consumes much less power than that ofFPGA in this project． Key words： CompactFlash Interface PLD DAQ U 独创性声明秉承祖国优良道德传统和学校的严谨学风郑重申明：本人所呈交的学位论