基于csp工艺生产热轧宽带30crmo钢的相变机理研究-材料科学与工程专业论文.docxVIP

万方数据 万方数据 Abstract The demand for high-quality steel materials is growing today, and the use of advanced steel technology to produce steel material has become a trend. In this context, researchers have gradually studied how to produce a variety of steel products with CSP process. Compared with traditional process this new one has many different processing parameters need to be developed according to its characteristics, which further produces high-quality strip products. The change of phase of steel materials after thermal processing has a great influence on the final microstructure and properties. Therefore the research for the impact of deformation and coiling process based on CSP process on the phase transition is an important part. This paper takes 30CrMo steel produced by some Steel Works under CSP process as the study object. The dynamic CCT curves are measured by thermal simulation test, and compared with the steel static CCT curves. The results showed that the dynamic CCT curve over Cold austenite to pearlite transformation temperature has increased, and at a lower cooling rate of bainite transformation occurs. Furthermore the physical metallurgy method is made use of to study how deformation (deformation temperature, deformation, deformation rate) and coiling process affect 30CrMo steel isothermal transformation. The results showed that with the decreasing deformation temperature, isothermal transformation became faster, which refined pearlite lamellar spacing and improved the rigidity. When the deformation amount gradually increased from 30% to 50%,the phase change completion time reduced after the first increase. After deformation amount reached a constant value, the phase change process was inhibited. But pearlite lamellar spacing was gradually reduced, and the hardness increased. And the deformation rate change from 1s-1 to 20-1 in the process. But also the first to play after isothermal transformation promote the role of inhibition.Pearlite lamellar sp