基于catia二次开发的轿车仪表盘视野设计-车辆工程专业论文.docxVIP

第 第 PAGE IV 页 将新开发的系统应用在上海汽车股份有限公司技术中心开发的三款新 车型上，对该校核系统的实用性、可靠性和准确性进行了检验。测试结果 表明，应用该自动化系统，可以克服校核工作的人员差异性，提高校核的 准确性，缩短校核的周期。 关键词：汽车视野，CATIA 二次开发，CAA，仪表盘视野 CLUSTER VISION DESIGN BASED ON THE SECONDARY DEVELOPMENT OF CATIA ABSTRACT Automobile visibility is one important segment during the procedure of car body general layout. It directly influences riding reliability safety, amenity and operational convenience. The vision is checked manually in the past. Nowadays how to check visual field efficiently, accurately and intelligently, and shorten design periodicity is an emphasis for present automobile research. So development the special system for automobile visual field is significant. In order to solve this problem, the project develops a system which can check the cluster vision automatically, using CAA. The main content of this paper can be divided into four parts: Analyse the interface/implementation and the interactive state mechanism of CAA As there’s no such article to explain how the interface/implementation and the interactive state mechanism works, the paper firstly studies those mechanism based on plenty of experience and puts an example to detail it. Propose a method of rim treatment and cluster vision check process Combining with the basic theories of driver’s vision and the actual situation of the local company, the design process is separated into two parts which are the eyellispe part and the cluster part. Develop an automobile visual field checking system Based on the design process, supported by CATIA V5 software as working platform, using the specify secondary development tool CAA and Visual C++, and being directed by the knowledge based engineering(KBE) methodology, this project then develops an automatic checking system for automobile visual check. 第 第 PAGE VI 页 And the new system is integrated into CATIA. The system includes three parts, they are the eyellispe module, the rim obstructed area module and the hub obstructed area module.