求解器基础 introduc时tory fluent training.pptVIP

This slide was taken from the Tgrid lecture. Here the grid structure is formally defined; necessary to make later discussions clear. They should have seen most of this in the demo. Now some of it can be reviewed here as well as the concepts of shadow-wall and default-interior. This slide and the next introduce a summary of all models available in fluent. I don’t think it is necessary to give examples of each model in particular, but to generalize by stating that reacting flows and multiple phase flows can be studied. ‘Can fluent do this…?’ type questions should be deferred to 1) after lecture discussion, 2) tutorial, or 3) ask an expert. If we don’t take this approach, this lecture could go on for a very long time. This slide completes the discussion of material property definition vs. material assignment and again accounts for multiple species and multiphase flows. Other aspects of solver setup (e.g., choosing models, boundary conditions, solver settings, etc.) are discussed later in their dedicated lectures. In this lecture, we talk more basics and move to post processing. This slide addresses surfaces. Mention that more meaningful results may require that additional surfaces be created. In the example shown, the planar slice is arbitrarily placed (i.e., not aligned with the grid). The mechanics of using grid adaption is discussed here. When to use it is still in the Solvers lecture. To end the lecture, this single slide was included to make the users aware that they can run the solver in parallel. The intention of this slide is to make them aware of this functionality and the fact that the mesh has to be partitioned. You should not go into the details of the different ways a mesh can be partitioned. Introductory FLUENT Notes FLUENT v6.3 December 2006 求解器基础 Introductory FLUENT Training 求解器执行 操作顺序一般是按菜单从左到右展开的顺序执行的 读入mesh文件然后转换单位 选择物理模型 定义材料属性 指定工作条件 指定边界条件 提供初始解 设置求解器控制 设置收敛监视器 计算和监视器解决方案 后处理 反馈回求解器 工程分析 文本用户界面 所有的图形用户界面命令都有一个对应的文本用户界面命令 高级命令只在TUI中可