基于fpga的无线加密键盘的设计与实现-电路与系统专业论文.docxVIP

基于 基于 FPGA 的无线加密键盘的设计与实现 西北师范大学硕士学位论文 西北师范大学硕士学位论文 Abstract The development of wireless communication technology, is undoubtedly a great breakthrough in the field of computer communication. Keyboard as one of the most commonly used external equipment of the computer, researching and designing the wireless keyboard, not only makes the computer out of bother wiring, but also makes the appearance of it more delicate, most importantly it can save the limited resources interface of the computer. However, compared to the wire communication technology, the obvious disadvantages of the wireless technology is that the security of the transmission data can not been guaranteed. This paper proposes one thought and method of how to design a wireless encryption keyboard. For the sender module, using one FPGA as the main controller to control receiving and encryption data which comes from the keyboard , then send the cipher to the wireless transceiver module by bluethooth sender module; for the receiving module , bluetooth receiver module receive the cipher and send the cipher data to the computer CPU, designers through writing applications program for PC, complete the decryption operation of the cipher. DES algorithm is a mature encryption algorithm, so far, it can only been decryption by the exhaustive method. However, for the wireless transmission of the keyboard information, using the exhaustion method to crack the password is not realistic. In addition, the DES algorithm is a kind of symmetric encryption algorithm, so it can been realized conveniently by the hardware. Therefore, in this paper, using DES as the core encryption algorithm , using FPGA as the hardware implementation platform for the DES algorithm, using VHDL language as the main design language and QuartusⅡ software as the simulation and validation. in the end, each module is proved to be correct. The propose of the wireless encryption Keyboard, not only is an in-depth study of the existing