基于devicenet总线的电动机综合保护器通信技术研究-电气工程专业论文.docxVIP

河北工业大学硕士学位论文 河北工业大学硕士学位论文 RESEARCH OF COMMUNICATION TECHNOLOGY OF MOTOR PROTECTOR BASED ON DEVICENET ABSTRACT AC asynchronous induction motors are widely applied because of its simple structure, small size, light weight, easy maintenance and so on in the industry production and in our life. If motor starts directly, it will have a greater impact on currents, which can cause electrical or mechanical damage to the motor and its dragging device. The main reasons which cause motor damage are due to overload, power lack of phase, as well as mechanical failure and so on, so a proper protection program can improve the electric drive system’s reliability and production continuity. DeviceNet, which is introduction of a low-cost communications links based on CAN, can be linked to the network of basic industrial equipment, thus avoiding expensive and cumbersome hard-wired. DeviceNet is an open network standards, the norms and protocols are open, so it becomes an excellent choice for bus communication in the instrumentation level for a variety of devices. This article is a research of the Motor Protector communication based on the DeviceNet bus. About the design of the hardware, PIC18F458 microcontroller is the core design and it implements the integrated motor power circuit protection devices、DeviceNet communication circuits、DeviceNet parameter settings and status indication circuit. The software includes a reasonable written code for various tasks to achieve the motor protector of the data acquisition and processing, real-time clock, status indicators, human-computer dialogue, and output control functions. Through the study on DeviceNet protocol, I design the flow of communication between MCU and sub-node according to the DeviceNet protocol. The study makes foundation for the future in-depth research. KEYWORDS: DeviceNet，Motor Protector，PIC18F458，FCS，Protocol 5 河北工业大学颐士学位论文 河北工业大学颐士学位论文 原创性声明 本人郑重声明:所呈交的学位论文，是本人在导师指导下，进行研究工作所取得 的成果。除文中已经注明引用的内容外，本学位论文的研究成果不包含任何他人创作 的、己公开发表或者