基于arm的汽车轮胎无线监测充放气控制系统设计-通信与信息系统专业论文.docxVIP

ABSTRACTABSTRACT ABSTRACT ABSTRACT According to the short of the current TPMS，designed the tire pressure wireless monitoring inflation／deflation control system whi ch not only has traditional function such as real·time monitoring and displaying tire pressure and temperature，auto．alarm for the abnormal tire pressure．but also call auto—adjust the abnormal tire pressure and parameters setting for different car．models，different road surface and different load． Now，it has a broad development prospects． Tire pressure wireless monitoring inflation／deflation control system consists of two parts：ODe is Remote Tire Pressure Monitoring module，and another is cent-tic control module．The former is mainly to monitor the pressure and temperature of tire，and monitor the power；the latter is mainly to receive the data transmitted from the former and display the pressure and temperature on LCD for drivers and give an alarm when it is abnormal．for the tire pressure abnormality,it cail make the valve adjust the tire pressure． In this paper,after a comprehensive understanding of the issues of background and current development status，based on the design of integrated project requirements， designed the software and hardware architecture；achieved all parts of hardware circuit of the CentriC contr01 module，include the schematic and PCB，write the software for testing the function of various module；analysis of each module in the circuit design issues that need attention；describled the reliability of the circuit design；field test for the overall system，it gives the results．The results show that the system has basically met the design requirements． Keywords：wireless communication，ARM，tire pressure monitoring，inflation／deflation control II 图目录图目录 图目录 图目录 图1．1轮胎检测模块的发展趋势框图 ．2 图2．1控制面板示意图 ．9 图2．2传统TPMS结构框图 一14 图2．3三体式TPMS结构框图 ．．14 图2．4系统总体框图 1 8 图2．5中央主控模块硬件框图 1 9 图2．6远端轮胎检测模块硬件框图 20 图2．7远端轮胎检测模块基本工作流程图 20 图2．8射频接收模块的流程图 21 图2．9基于LPC2214的软件架构 ．22 图3．1电源电路设计框架 24 图3．2电源电路保护及滤波电路 25 图3．3末级电源电路 26 图3．