Cisco Packet Tracer中设备模块用途.docxVIP

Cisco Packet Tracer中设备模块用途 HWIC-2T：The HWIC-2T is a Cisco 2-Port Serial High-Speed WAN Interface Card, providing 2 serial ports. HWIC-4ESW：The HWIC-4ESW provides four switching ports. HWIC-4ESW： 提供4个交换功能接口。 HWIC-8A：The HWIC-8A provides up to eight asynchronous EIA-232 connections to console ports. WIC cover：The WIC cover plate provides protection for the internal electronic components. It also helps maintain adequate cooling by normalizing airflow. WIC盖板：可以保护内部电子元件。同时有助于保持足够的冷却气流. HWIC-AP-AG-B：The HWIC-AP-AG-B module is a High-Speed WAN Interface Card providing integrated Access Point functionality in the Cisco 1800 (Modular), Cisco 2800, and Cisco 3800 Integrated Services Routers. It supports Single Band 802.11b/g or Dual Band 802.11a/b/g radios. WIC-1AM:The WIC-1AM card features dual RJ-11 connectors, which are used for basic telephone service connections. The WIC-1AM uses one port for connection to a standard telephone line, and the other port can be connected to a basic analog telephone for use when the modem is idle. WIC-1AM：WIC-1AM卡特性：提供2个RJ－11连接器，以满足基本电话服务链接需要。WIC-1AM使用一个端口满足仅仅一个标准的电话线链接，其它端口可以连接普通模拟电话机，当Modem空显示，就可以使用普通的模拟电话机。 WIC-1ENET:The WIC-1ENET is a single-port 10 Mbps Ethernet interface card, for use with 10BASE-T Ethernet LANs. WIC-1ENET：WIC-1ENET 是一个单端口10Mbps以太网接口,用于10BASE-T局域网。 WIC-1T:The WIC-1T provides a single port serial connection to remote sites or legacy serial network devices such as Synchronous Data Link Control (SDLC) concentrators, alarm systems, and packet over SONET (POS) devices. WIC-1T：WIC-1T 提供一个串口，可以连接到远端站点、legacy串口网络设备诸如SDLC、告警系统或者POS接口。 WIC-2AM:The WIC-2AM card features dual RJ-11 connectors, which are used for basic telephone service connections. The WIC-2AM has two modem ports to allow multiple data communication connections. WIC-2AM特性：2个RJ-11连接器，被使用于普通电话服务。WIC-2AM有两个Modem接口用于多路数据通信。 WIC－2T:The 2-port asynchronous/synchronous serial network module provides flexible multi-protocol support, with each port individually configurabl