基于android的港口吊车监控系统的设计与实现-计算机技术专业论文.docxVIP

华中科技 大学硕士 学 华 中 科 技 大 学 硕 士 学 位 论 文 II II Abstract In the 21st century, Chinas container transport industry has entered a sustainable, comprehensive development. The port control system gradually goes to the direction of large-scale, automation and information. In order to improve the efficiency of the port operating efficiency, so crane monitoring system (CMS) has appeared. In recent years, the mobile terminals has been widely used, they are not only enrich peoples lives, due to its excellent computing performance, do also enter into the field of industrial applications. So the CMS needs to be moved to the Android for further improving operating efficiency, timely accessing to information. Through the analysis of CMS working mechanisms and Android platform, the paper designed the overall system architecture. In the design of architecture, the system obtained monitoring and database data from the server through wireless LAN, defining the transmission data format at the same time. After the data parsed, corresponding module would use the data to implemented a series of functions including simulating crane operations, tracking devices working status, operating information stored and inquired. As for the high real-time monitoring requirements and communication easy interrupted, the paper used a number of ways to optimize the system, including the car motion interpolation,server-side real-time push and reading the database by group. Finally, the system succesed,in the actual operation of the process, running smoothly, and having a little delay , a higher performance and practical value. Keywords: Crane monitoring system, Android, Operation simulation, Data locality PAGE IV PAGE IV 目 录 摘 要 I Abstract II 1 绪论 1.1 课题的研究背景和意义(1) 1.2 终端操作系统发展现状(1) 1.3 港口监控系统的发展现状 (2) 1.4 论文的组织结构(4) 2 系统需求分析及总体设计 2.1 CMS 系统概述 (6) 2.2 向 Android 平台移植存在的问题分析 (8) 2.3 Android 应用开发特点 (9) 2.4 基于 Android 的港口吊车监控系统设计目标 (9) 2.5 系统总体设计(10) 2.6 本章小结(14) 3 Android 平台及相关具体设计 3.1 Android 平台概述 (