2019年T构转体施工工艺框图.docVIP

T-structure turning construction technology Frame Sub-table sted plate paintingGrease fluorine powderSub-circle way sandMortar levelingFoundation top concretingsupporting colunnInstalling sub-table sted Sub-table sted plate painting Grease fluorine powder Sub-circle way sand Mortar leveling Foundation top concreting supporting colunn Installing sub-table sted platestedaxle axle Foundation 1st fioor concrering Welding foundation steel,preserved piersted of pier Erecting form concreting beam Section No.0.1.1’Concreting pier Erecting form concreting beam Section No.0.1.1’ Concreting pier Erecting form concreting upper tabletemporary support Hoisting upper table sted plate to proper place Upper table insert fluorine mushroom end ,painting greaseReaching design Upper table insert fluorine mushroom end ,painting grease requirement Removing Supports Removing Supports Concreting symmtrey beam section from2（2ˊ） Concreting symmtrey beam section from2（2ˊ）to10（10ˊ）,lapping supports to concrete from 12（12ˊ）to15（15ˊ） Tensioning beam Section No.0,11’ over 85%than design value Connection sectionconcretingTemporary strand Connection section concreting Temporary strand tension Removing temporary Support on turntable Welding connection section 11（11ˊ）skeletonSealing TableTurning body Welding connection section 11（11ˊ）skeleton Sealing Table Turning body Erecting border spanT-beamRemoving supports of Cast-in-place sectionConnectionSection tensionRemoving Erecting border span T-beam Removing supports of Cast-in-place section Connection Section tension Removing Temporary strand Bottom Plate Vertical Prestress tension Concreting sealing Bridge pavement over 85%than design value