金属化聚丙烯薄膜.PDF

® 金属化聚丙烯薄膜 Metallized PP （Polyproplene ） films ◆ 特点 Feature 金属化薄膜是在真空状态下，将铝或锌铝蒸镀到薄膜的表面。该材料介电常数大，绝 缘电阻高，耐热性能好，抗拉伸性能好，适用于制作金属化聚丙烯薄膜电容器。 The AL or ZN-AL layer deposited by evaporation under vacuum,big dielectric constant and insulation resistance,and excellent shrinkage and tensile strength.Widely used in Metallized PP film capacitors. ◆ 类型 Type Type 产品名称 Name of product 单面单留边铝金属化聚丙烯膜 AP-S Single margin OPP film with oneside AL metallized 单面双留边铝金属化聚丙烯膜 AP-T Double margin OPP film with oneside AL metallized 单面中留边铝金属化聚丙烯膜 AP-M Middle margin OPP film with oneside AL metallized 单面单留边铝金属化加厚边聚丙烯膜 APH-S Single margin OPP film with oneside AL metallized and heavy edge 单面单留边锌加厚边铝金属化聚丙烯膜 APZH-S Single margin OPP film with oneside AL metallized and ZN heavy edge 单面单留边锌铝金属化加厚边聚丙烯膜 ZAPH-S Single margin OPP film with oneside ZN-AL metallized and heavy edge 单面双留边锌铝金属化聚丙烯膜 ZAP-T Double margin OPP film with oneside ZN-AL metallized 单面中留边锌铝金属化加厚边聚丙烯膜 ZAPH-M Middle margin OPP film with oneside ZN-AL metallized and heavy edges 单面多串式留边铝金属化聚丙烯膜 AP-R Internal many series OPP film with oneside AL metallized 注：以上型号是常用型号，如果需要别的金属化膜，请联系我们；对于高温聚丙烯膜， 型号表示方式就是在上述型号前加 H ，如HAP-S 。 Note: Above the type are general, if you need other metallized film, please contact us.For high temperature OPP films,add H on the above type,for example:HAP-S。 ◆ 厚度 Thickness ( μm) Thickness(μm) 3.5 ~ 20.0