互感器自动检定系统交互接口的设计与实现-系统工程专业论文.docxVIP

华 中科 技大学 华 中 科 技 大 学 硕 士 学 位 论 文 II II Abstract With the fast development of our country’s electric power business, the current transformer, as one of the most widely used equipment in power system, becomes more and more important. However, the current transformer’s performa nce indicators including error, angular, insulation and compression have a great influence on the safety and reliability of the power system. Since the current power system transformers are manually tested now and a lot of manpower and material resources have been wasted on duplicated operating, the State Grid EPRI cooperated with the North China Power Grid, intends to develop a fully automated testing system. The low-voltage current transformer automatic verification system can implement intelligent stora ge, automatic storage, automatic test, which will greatly improve test efficiency and test accuracy. Based on this background, in the process of developing this system, the interaction between the integration platform and the transformer automatic test system interface has been studied in depth and the design and implementation has been introduced. This thesis analyzes and summarizes the previous transformer test methods, especially the work of domestic scholars on the realization of the transformer automatic verification system, followed by the details of the objectives of the verification system in accordance with the requirements of the actual project. The interface system is designed to be a Web Service project with an inner database; Key technologies used in the project are: XML parsing, data manipulation, Web Service. The entire process to build an interface function, which will show the other interface implementation process and methods, is introduced. Finally, a test program to test the business process of the system is developed. Keywords: Current Transformer Automatic Verification Interface Interchange Web Service III III 目 录 摘 要 I HYPERLINK \l _bookmark0 AbstractII HYPERLINK