Abaqus中Topology和Shape优化指南外文电子书籍.pdfVIP

Abaqus 中 Topology 和 Shape 优化指南 目 录 1. 优化模块界面 - 1 - 2. 专业术语 - 1 - 3.定义拓扑优化 Task(general optimization 和 condition-based optimization) - 2 - 3.1 General Optimization 参数设置 - 3 - 3.1.1 Basic 选项参数 - 3 - 3.1.2 Density 选项参数 - 4 - 3.1.3 Perturbation 选项参数 - 5 - 3.1.4 Advanced 选项参数 - 5 - 3.2 Condition-based topology Optimization 参数设置 - 6 - 3.2.1 Basic 选项参数 - 7 - 3.2.2 Advanced 选项参数 - 7 - 4 定义 Shape Optimization Task 方法 - 8 - 4.1 Basic 选项参数 - 8 - 4.2 Mesh Smoothing Quality 选项参数 - 9 - 4.3 Mesh Smoothing Quality 选项参数 - 11 - 5 定义 design response 变量方法 - 13 - 5.1 单个 design response 定义方法 - 14 - 5.2 combined design response 定义方法 - 15 - 5.3 design response 使用注意事项 - 17 - 5.3.1 定义 design response 的操作 - 17 - 5.3.2 condition-based topology optimization 的design response - 18 - 5.3.3 general topology optimization 的design response - 18 - 5.3.4 design response for shape optimization - 21 - 6 定义 objective function 方法 - 22 - 6.1 目标函数定义 - 23 - 6.2 目标函数的运算 - 23 - 6.2.1 min 运算 - 23 - 6.2.2 max 运算 - 24 - I 6.2.3 minimizing the maximum design response - 24 - 7 定义 Constraints 方法 - 24 - 8 定义 Geometric restrictions 方法 - 25 - 8.1 Defining a frozen area - 26 - 8.2 Specifying minimum and maximum member size - 26 - 8.3 maintaining a moldable structure(可拔模结构) - 27 - 8.4 maintaining a stampable structure(冲压成型结构) - 28 - 8.5 Specifying a symmetric structure - 29 - 8.6 Applying additional restrictions during a shape optimization - 31 - 8.7 Combining geometric constraints - 31 - 9 定义 Stop conditions