精密滚珠丝杠副可靠性试验及评估方法研究-机械电子工程专业论文.docxVIP

优秀毕业论文 精品参考文献资料 研究生优秀毕业论文 Abstract Abstract 硕士论文 Abstract This paper was aimed at solving the big gap problem of reliability between domestic precision ball screw and similar foreign hi曲一end product witll the background of national science and technology project”Common technology research and development of rolling functional components for high—grade machine tool”．At first，a set of test software and reliability test plan was developed，and aiso the data evaluation method based on the self-developed precision ball screw reliability test device Was studied．Then，the ball screw reliability distribution model Was set up，which provided test specification and theoretical basis for the domestic ball screw theoretical research． Thirdly,the need for four kinds of reliability research test Was summarized．And also introduced the basic working principle and composition of hardware system of ball screw reliability test device，SO as to provide a reference for the design of test scheme then introduced the major technical parameters which the device can measure． This paper also designed the structure and main modules of the device’S software and cleared test rig measurement and control software’S specific function，designed detailed program flow chart and software interface． Then，the experiment scheme Was designed．The basic method and process of reliability test and fault judgments Was summed up．The basis and test scheme of reliability was presented in detail．The ball screw reliability growth scheme was designed，which selected Duane model as the growth model，and also presented a method for determining the model parameter and tracking process，cleared the end of the test and fault judgment． This paper made a comparative analysis of loading models and abr