激光熔覆快速成形光内同轴送粉斜壁堆积的初步研究-机械设计及理论专业论文.docxVIP

优秀毕业论文 精品参考文献资料 激光熔覆快速成形光内同轴送粉斜壁堆积的初步研究ABSTRACT 激光熔覆快速成形光内同轴送粉斜壁堆积的初步研究 ABSTRACT Side of many metal parts have the lean geometrical character．Aiming at the disadvantages of fabricate metal parts、Ⅳitll lean side witllout any support in the process of laser cladding rapid prototyping，this article puts forward a new process of Inside—Laser coaxial powder feeding to fabricate lean parts offset and without any support．Compared with the process of lateral powder feeding and coaxial powder feeding，this article conclude the advantages of fabricate lean parts using the process of inside-laser coaxial powder feeding． By experiments、comparing and analyzing，this article conclude that the process of inside．1aser coaxial powder feeding overcomes the disadvantages of lateral powder feeding and coaxial powder feeding：realizing the integrative coaxial function of laser, powder and gas，forward and vertical powder feeding inside laser,being steady and easily controlled of powder flow and shielding gas，excellent coupled performance of laser and powder reciprocity,parts surface quality and dimension precision are improved greatly．It Can make the shaping of fabricate lean parts offset and without any support feasible and improve the general quality ofthe lean parts． Establish powder temperature rise model under the action of ring light,determine the condition of the powder particles when reaching the molten pool through calculate the temperature rise condition and choose the process parameters of the formation of the lean part，ensuring to get the favorable cladding quality． Using new inside—laser coaxial powder feeding nozzle to do several monolayer cladding experiments in the multimode laser,the relation between different process parameters and cladding coat quality is obtained．This article establishes the academic model of the lean angle，and find out the process parameters which will influence the lean angle．Based on the former experiment research，experiment of fabricating lean parts