工厂总配变电所及高压配电系统设计.doc

PAGE II PAGE II PAGE I *************** 毕业论文 题 目：某塑料制品厂总配变电所及高压配电系统设计 英文并列题目：A Plastic Products Factory Total Substation And high-Voltage Power Distribution System Design 学院： 专业： 班级： 学生： 指导教师（职称） 完成时间 年 月 日至 年 月 日 摘 要 电能是现代工业生产的主要动力能源。工厂供电设计的任务是从电力系统取得电源，经过合理的传输、变换，分配到工厂车间中每一个用电设备上。随着工业电气自动化技术的发展，工厂用电量的迅速增长，对电能质量、供电可靠性以及技术经济指标等的要求也日益提高。供电设计是否完善，不仅影响工厂的基本建设投资、运行费用和有色金属消耗量，而且也反映到工厂供电的可靠性和工厂的安全生产上，它与企业的经济效益，设备和人身安全等是密切相关的。 根据工厂的供电电源，用电负荷和用电性质，通过这些数据资料的分析，来确定其变电所的规模和计算其用电负荷，选择合适的主接线形式和变压器的型号，确定该变电所的电气主接线图，根据计算其用电负荷和短路计算选择断路器，熔断器，隔离开关，电压、电流互感器，避雷器，母线等电气设备。 关键词：变电所、配电系统 负荷和短路计算 设备选型 ABSTRACT The electrical energy is the modern industry production main power energy. The factory power supply design duty is obtains the power source from the electrical power system, passes through the reasonable transmission, the transformation, assigns to the factory workshop in on each current collector. Along with the industry electricity automation technology development, the factory with the electric quantity rapid growth, to the electrical energy quality, the power supply reliability as well as the technology economic indicator and so on the request also day by day enhances. The power supply designs whether consummates, not only affects the factory the capital investment, the operating cost and the non-ferrous metal consumption, moreover also reflected to the factory power supply reliability and in the factory safety in production, it and enterprises economic efficiency, the equipment and the personal safety and so on is the close correlation . According to the factory electric power supply, uses electricity shoulders and uses electricity the nature, through these data material analysis, determined its transformer substation the scale and calculates it to use electricity the load, chooses the appropriate main wiring form and the transformer model, deter