煤矿井下硬岩定向钻进螺杆马达选型及试验-煤田地质与勘探.PDFVIP

第46 卷 第1 期 煤田地质与勘探 Vol. 46 No.1 2018 年2 月 COAL GEOLOGY EXPLORATION Feb. 2018 文章编号: 1001-1986(2018)01-0176-05 煤矿井下硬岩定向钻进螺杆马达选型及试验 金 鑫 ( 中煤科工集团西安研究院有限公司，陕西 西安 710077) : 4 7 8 5 6 2.52 m/h ︰ ︰ 2.15 m/h550 h2 ： ：P634.7 ：A DOI: 10.3969/j.issn.1001-1986.2018.01.030 The selection and test analysis of PDM for directional drilling in hard rock JIN Xin (Xi ’an Research Institute, China Coal Technology and Engineering Group Corp., Xi ’an 710077, China) Abstract: In order to improve the efficiency of directional drilling of hard rock in underground coal mine, based on the analysis of the orders of PDM for directional drilling in hard rock, the paper chooses four different types of PDM to make the directional drilling test in hard rock of underground Sangshuping coal mine in Hancheng. The test results show that one type of seven-eight-lobe PDM with four stages of power and another type of five-six-lobe PDM with five stages of power in directional drilling in hard rock, of which the average penetration rate is 2.52 meters per hour and 2.15 meters per hour respectively, and the cumulative drilling time can reach 550 hours. These two types of PDM show the characteristics of a long life and high efficiency and so on. They are suitable for direc- tional drilling in hard rock. Keywords: directional drilling; PDM; hard rock; high efficiency 11