电路分析英文祥lecture10.pptVIP

16.3 – Ladder Networks Here we will calculate the total resistance and resulting source current, and then work back through the ladder until the desired current, I6 , (or voltage) is obtained. * Ladder Networks Impedance ZT , ZT and ZT and the currents I1 and I3 are defined: * * Series-Parallel Circuits Boylestad, p 719 Fig 16.14 Compute I Find I1, I2 and I3 Verify Kirchhoff’s current law by showing that I=I1+ I2 +I3 * Solution to 16.14 * Solution continued * A word about nodal and mesh analysis Same as DC, but need to do it will all the phases in AC, otherwise the same Lets do a Nodal