汽车发动机连杆自动清洗工艺装备的研制-机械工程专业论文.pdf.docxVIP

广东工业大学硕士学位论文测试法mg／6套(连杆)满足企业相应连杆检测精度等级规定。实践证明了清洗工艺 广东工业大学硕士学位论文 测试法mg／6套(连杆)满足企业相应连杆检测精度等级规定。实践证明了清洗工艺 及清洗装置对高效清洗连杆的可行性和有效性，在整个连杆清洗行业是个巨大的突 破，提高其经济效益。但也存在一些不足之处，例如清洗剂使用碳氢清洗剂等，期 待今后能将其更加的完善。 关键词：连杆；清洗工艺；干燥技术；夹紧装置 11 万方数据 ABSTRACTABSTRACT ABSTRACT ABSTRACT The engine is the heart of the car and a power source，As connecting rod of engine pans is connected to the piston and the crankshaft to pass the motion and force components．Engine in the environment of high—speed operation，the rod need to maintain a high degree of cleanliness to prevent stains or mechanical impurities affect the overall health of the engine．Rod clean working surface is mainly reflected in through the hole，tank，bushings，and with the end face，as an important indicator of the rod quality assessment．Currently The cleaning of the connecting rod is divided into manual brushing，washing，immersion and other traditional cleaning methods in production． This research using high-pressure injection technology,high pressure washing， immersion，foam washing，leaching and other gas—liquid modular integrated cleaning to rod．According to the actual situation of production and the economic and environmental considerations，combined with the automatic control technology to develop a connecting rod cleaning machines is particularly prominent in connecting rod cleaning industry．At the same time，researching and analysis high pressure jet washing and drying process of kerosene cleaners，and eventually developed the connecting rod automatic washing machine，to meet the needs of production．The main works of this paper as follows： 1、describing the purpose and significance of the research paper,researching and investigation connecting rod cleaning related areas of the status quo at home and abroad，and it has analyzed the practical significance of this research 2、Combined with an enterprise connecting rod cleaning process，based on connecting rod this general process of cleaning technology,Research high pressure water j et cleaning te