盾构直接切削大直径钢筋混凝土桩基试验研究-NSFC-国家自然科学.PDF

32 12 Vol.32 No.12 2013 12 Chinese Journal of Rock Mechanics and Engineering Dec .2013 1 1 2 3 4 1 (1. 100044 2. 215004 3. 300308 4. () 200120) 14  1 200 mm 2 mm/min U 45 A 2013 TEST STUDY OF SHIELD CUTTING LARGE-DIAMETER REINFORCED CONCRETE PILES DIRECTLY 1 1 2 3 4 1 WANG Fei YUAN Dajun DONG Chaowen HAN bing NAN Haoren WANG Mengshu (1. Tunnel and Underground Engineering Research Center of Ministry of EducationBeijing Jiaotong University Beijing 100044 China 2. Suzhou Rail Transit Co.Ltd .SuzhouJiangsu215004China 3. China Railway 13th Bureau Group Co.Ltd . Tianjin 300308China 4. Japan Komatsu(China) Investment Co.Ltd .Shanghai 200120China) Abstract Based on the construction need of shield cutting 14 large-diameter bridge piles in Suzhou subwaythe field test of shield cutting two  1 200 mm diameter piles was carried outthe effect and mechanism of cutting pilescharacteristics of cutting parameters and damage law of cutting tools were analyzed. Thenthe feasibility and key technology of cutting large-diameter piles were studied. The test results show that shell cutter can be fit for cutting pile directly it breaks concrete by the way of shear cutting and laterally squeezing to fracture and its working mechanism of cutting rebar is shear cutting. The wrapped condition of rebar by surrounding concrete is the key factor determining whether rebar could be cut off effectively. The thrust value and torque value which acting on the pile have an approximately linear relationship with penetration. The alloys of cutting tools