钢锭孔洞型缺陷锻合及空心钢锭锻造.pdfVIP

24 1998 4 ( 82 ) 丁　宇 (, 618013) H 0/D 0= 1.0 , , , WHF Closing Up Porosity Flaw of Ingot and Hollow Ingot Forging Ding Yu Abstract The internal deformation of t he blank with height to diameter ratio H 0 /D 0= 1.0 dur ing upset forming has been quantitat ively analysed and calculated, at the same time,the porosity closing w ay and t he deformation required during forging have been analysed and calculated quantit atively and qualitat ively The charact eristics of internal flaw in hollow ingots have been introduced briefly and on the. , above analysis and calculation, in view of retaining ring funct ion and cold deformation product ion require ments,t he WHF forging process w ithout upseting deformation has been made for forging retaining ring w ith hollow ingot. Key WordsHollow Ingot, Retaining Ring, Forging, Cold Expanding Deformat ion 1 2 2. 1 , , , , , 1/ 2 , V , 2. 2 , : : 25 3. 2 , ( , , , ) ,