智能窗户开关都电路毕业设计(论文).doc

2013届毕业设计(论文) 题 目: 智能窗户开关电路 学 院: 电子信息与工程学院 专 业: 电子信息工程 班 级: 浦电子0905 姓 名: 夏欣 指导老师: 武晓光 起讫日期: 2013-2-25～2013-6-10 2013 年 6 月 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT 7 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT I 摘 要 随着电子技术的发展和人民生活水平的不断提高，智能窗已经越来越多地被用到了现代智能化建筑中，提供住户一个安全、方便的环境。据统计，在未来的几年内，安装智能窗的用户将不断增加。本次设计的智能窗户系统能通过其数据检测传感电路不断循环检测室外湿度及温度，当湿度或者温度达到一定时，窗户自动关闭，防止潮湿空气或雨水进入房间，当温度和湿度都到达合适程度时，窗户自动开启。 本文通过使用AT89C51单片机、ULN2003驱动电路、LCD1602显示模块设计了一种智能窗户系统。该系统可以实现自动开关窗，本文详细介绍了系统的整体设计原理，分析了系统的硬件及软件结构，并且制作了实物，通过测试，系统具有良好的效果。 关键词：单片机；ULN2003；步进电机；1602；DHT11湿度传感器 PAGE PAGE II PAGE \* MERGEFORMAT II PAGE \* MERGEFORMAT II Abstract With the development of electronic technology and the improvement of peoples living standard, intelligent window is increasingly being used in modern intelligent building, offer a safe, convenient environment. According to statistics, in the next few years , the installation of intelligent window users will continue to increase. The design of the intelligent window system through the sensing circuit of the data continuous cycle detection outside humidity and temperature, when the humidity or temperature reaches a certain time, close the window automatically, prevent the moist air or water into the room, when the temperature and humidity are to arrive at an appropriate level, the window to open automatically. In this paper, by using the AT89C51 SCM, ULN2003 drive circuit, LCD1602 display module, a design of intelligent window system. This system can realize the automatic window, this paper describes the overall design principle of the system, analyzes the structure of hardware and software system, and made the physical, to pass the test, the system has a good effect. Keywords: microcontroller ；uln2003；stepper motor；lcd1602 PAGE PAGE II PAGE \* MERGEFORMAT I PAGE \* MERGEFORMAT I 目录 TOC \o 1-3 \h \u HYPERLINK