序批式反应器处理工业废水牛奶生物膜系统4321.docVIP

. 页 序批式反应器处理工业废水的牛奶生物膜系统 Sequencing batch reactor biofilm system for treatment of milk industry wastewater Suntud Sirianuntapiboona,*, Narumon Jeeyachokb, Rarintorn Larplaia aDivision of Environmental Technology, School of Energy Thungkru, Bangmod, Bangkok bDivision of Biochemical Technology, School of Bioresources and Technology, King Mongkut’s University of Thungkru, Bangmod, Bangkok Received 22 October 2003; revised 27 November 2004; accepted 19 January 2005 Available online 21 April 2005 Abstract A sequencing batch reactor biofilm (MSBR) system was modified from the conventional sequencing batch reactor (SBR) system by installing 2.7 m2 surface area of plastic media on the bottom of the reactor to increase the system efficiency and bio-sludge quality by increasing the bio-sludge in the system. The COD, BOD5, total kjeldahl nitrogen (TKN) and oil grease removal efficiencies of the MSBR system, under a high organic loading of 1340 g BOD5/m3 d, were 89.3G0.1, 83.0G0.2, 59.4G0.8, and 82.4G0.4%, respectively, while they were only 87.0G0.2, 79.9G0.3, 48.7G1.7 and 79.3G10%, respectively, in the conventional SBR system. The amount of excess bio-sludge in the MSBR system was about 3 times lower than that in the conventional SBR system. The sludge volume index (SVI) of the MSBR system was lower than 100 ml/g under an organic loading of up to 1340 g BOD5/m3 d. However, the MSBR under an organic loading of 680 g BOD5/m3 d gave the highest COD, BOD5, TKN and oil grease removal efficiencies of 97.9G0.0, 97.9G0.1, 79.3G1.0 and 94.8G0.5%, respectively, without any excess bio-sludge waste. The SVI of suspended bio-sludge in the MSBR system was only 44G3.4 ml/g under an organic loading of 680 g BOD5/m3 d. q 2005 Elsevier Ltd. All rights reserved. Keywords: Sequencing batch reactor (SBR); Bio-film; Milk industry wastewater; Excess bio-sludge 1. Introduction The annually increasing milk consumption in Thailand has demanded an increase in milk production resulting in an increasi