xx公司完美版说明书LMD-8240.pdfVIP

8-Channel Dimmer Module Description The 8-Channel Dimmer Module is designed for dimming incandescent, neon, cold cathode, and magnetic Feature Summary transformer low voltage loads. The dimming is performed by conservatively rated triac devices using phase control technology. • Eight outputs with an individual override switch and RFI filter based on a toroidal inductor for The module is rated at 20 amps or 2400 watts (de-rated low noise operation to 1920 watts) at 120V AC and 4400 watts (de-rated to 3520 watts) at 240V AC. The total rating may be divided up among the eight outputs in any desired proportion so • 120V AC - 20 amps or 2400 watts (de-rated to long as no single output exceeds 15 amps (1800 watts @ 1920 watts) 120V AC or 3300 watts @ 240V AC). Each output has an individual manual override switch. • 240V AC - 20 amps or 4400 watts (de-rated to 3520 watts) The 8-Channel Dimmer Module is not recommended for dimming solid state electronic transformer low-voltage • Designed to dim incandescent, neon, cold loads, unless the transformer is so rated (see Inverse cathode, and magnetic transformer low voltage Phase Dimmer Module Technical Specification). An air loads gap relay is connected to the main feed line of the module. The relay will be open (off) when all loads on the module are off and will be closed (on) when one or more loads on the module are on. This feature eliminates any voltage potential going to the loads when all loads on the module are off.