汽车交通事故碰撞计算软件研究开发..doc

摘要 PAGE \* MERGEFORMAT I PAGE \* MERGEFORMAT I 摘要 随着经济社会的发展，汽车的使用日益广泛。道路交通事故的发生频率也大幅度增加，不仅给人们生命和财产安全带来威胁，而且交通事故处理过程的繁琐对交通状况以及当事人的心理造成很大的影响，此外还增加了交警的工作强度。所以对交通事故的分析有着非常重大的意义。目前国内在交通事故现场处理及事故鉴定时，多采用大量的人工操作，现场的保护与清理，现场勘查，调查取证，检验鉴定与事故责任认定，处理鉴定周期一般较长，不仅影响交通恢复，还会耗费更多的人力物力资源，增加受害人及其家属的痛苦所以，提高交通事故的处理效率刻不容缓。本课题利用Visual Basic及Flash8进行开发的汽车一维二维碰撞速度计算软件只需在界面中输入事故中测量出的相关参数就可得出汽车碰撞前后的车速，并通过flash再现汽车碰撞过程，可以确定事故车辆行驶速度与运动轨迹，为事故双方责任认定提供有力依据。在现分析事故发生的过程中，有利于提高交通事故处理的高效性、公正性和准确性。 关键词 汽车碰撞交通事故 仿真模拟 车速计算 软件研发 Abstract PAGE \* MERGEFORMAT II PAGE \* MERGEFORMAT II Abstract With the development of economy and society, the use of automobiles is increasingly widespread.. Road traffic accidents occur frequently, which not only brings the threat to the life and property of the people and traffic accident processing cumbersome process have great influence on traffic conditions, and then the psychological, in addition to increasing the intensity of the work of the police. So it is very important to analyze the traffic accident.. At home in the traffic accident scene processing and identification of the accident, the use of a lot of manual operation, site protection and cleaning, scene investigation, investigation and evidence collection, identification and accident identified, appraisal cycle is generally longer, not only affects the restoration of traffic, will cost more human and material resources, increase the suffering of the victims and their families... So, improve the processing efficiency of the traffic accident without delay.This topic use visual basic and Flash8 development of automobile 1D and 2D collision velocity calculation software, which only need to enter the accidents in the measurement of relevant parameters in the interface can be obtained before and after the vehicle collision speed, and through flash reappear automobile collision process, can determine the accident vehicle running speed and trajectory, and provides a strong basis for the responsibility of bo