传感器支撑结构问题引起机组轴振测量值异常分析和处理.PDF

内蒙古电力技术 88 INNER MONGOLIA ELECTRIC POWER 2018 年第36 卷第4 期 doi:10.3969/j.issn. 1008-6218.2018.04.011 传感器支撑结构问题引起机组轴振测量值 异常分析与处理 俎海东，朱生华，魏 超，李晓波 （内蒙古电力科学研究院，呼和浩特 010020 ） 摘要：介绍了汽轮发电机组轴振测量方式及测点安装注意事项，对轴振传感器支撑结构 异常引起的轴振测量问题进行了分析并给出了诊断方法。对某汽轮发电机组启动过程中发 生的轴振测量值存在异常峰值问题进行了实例分析，认为机组轴振传感器支架刚度差、轴振 传感器支撑结构发生共振是导致机组启动过程中轴振测量值异常的直接原因。对轴振传感 器支架进行加固处理后，机组启动过程中轴振测量值再未发生过异常峰值问题。 关键词：汽轮发电机组；振动；传感器支撑结构；支架；临界转速；共振；刚度 + 文献标志码：B 中图分类号：TK268. 1 文章编号：1008-6218（2018 ）04-0088-04 Analysis of Abnormal Value of Shaft Vibration Measurement Caused by Sensor Supporting Structure Problem and Its Treatment ZU Haidong, ZHU Shenghua, WEI Chao, LI Xiaobo （Inner Mongolia Power Research Institute, Hohhot 010020, China） Abstract ：This paper introduced the shaft vibration measurement method and the installation notices of the turbine generator set, analyzed the problems in axial vibration measurement caused by the abnormal support structure of the axial vibration sensor, and gave the diagnosis methods. The problems of abnormal peak value of axial vibration measurements during the start-up of a steam generator set was analyzed. It was considered that the stiffness difference of the shaft vibration sensor support and the resonance of the support structure of the shaft vibration sensor were the direct causes of the abnormal measurement value of the shaft vibration during the starting process for the unit. After