把XP系统装进U盘方法.docVIP

把XP系统装进U盘方法 the cause of failure of XP from USB devices In fact, may have some friends tried to install the XP operating system directly to the large capacity of USB flash drive, USB card reader in the memory card or USB mobile hard disk, but the results are in the majority with the losers? The cause of the failure is mainly XP operating system startup, will identify the USB flash drive to be a rather than the native disk, external USB storage system to produce the USB flash drive identity conflict problem, which appear blue screen error on your system when Windows starts up. Though attempts to fail are more numerous, there are many successful cases? One German friend, Dietmar, shares his success stories in BBS? In the post, many users also successfully installed the XP system on USB flash drives, according to the Dietmar method. Due to Dietmar disclosure on the Internet success experience stored in the form of discussion, which mixed with other net friend，s response, and several different schemes, read quite messy, and in some places is vague, readers may even see dozens of pages to see clue, so the author specially will be among the most simple and feasible Tutorial 2 scheme is introduced, and sort out the following report for your reference? the actual operation procedure 1. Prepare a blank disk after formatting, with Windows XP SP1 operating system of 〃fresh〃 installation on a hard disk (must be in stalled in the first partitio n). Before in stallati on, the user must shut down this feature in the motherboard BIOS before the CPU is a processor with HyperThreading (HyperThreading) technology. With at the same time, used to install Windows XP SP1 computers don，t with other hard drives, or to connect any USB device, the overall system hardware configuration is as simple as possible, as for cd-rom and floppy drive can normal connection. The XP cd-rom is installed with the SP1 patch package, but there are no SP2 patches? With the presence of SP2, there will be a blue