基于OMNeTAd+hoc网络仿真.doc

PAGE PAGE 41 摘 要 本文主要工作是介绍 OMNeT++仿真平台，并基于OMNeT++搭建Ad hoc网络环境来进行仿真试验。首先是详细介绍OMNeT++仿真器的构成原理，尤其是对其NED语言和编程语法等做深入讲解，同时也对OMNeT++的移动框架（MF，Mobility Framework）组成原理进行了系统的讲解，因为它为我们提供了仿真无线移动网络所需各种基本模块，把我们从设计底层的模块结构和拓扑结构中解放出来，让我们能够把精力放在具体协议的实现上，加快了搭建仿真网络的过程，最后是进行Ad hoc 网络仿真环境的搭建，并在该环境中对在计算机网络中常用来检测网络连通性的Ping 命令进行了仿真试验，并对抽取所需的数据进行分析。 关键字 网络仿真 OMNeT++ Ad hoc网络 Abstract The main work of this thesis introduces the OMNeT++, and organize a Ad hoc network for the simulation test based on OMNeT++. Firstly, it introduces the structure of OMNeT++ in detail, especially its NED language and the syntax of program, as well as OMNeT++’s Mobile Framework (MF, Mobility Framework) principle, because it provides with basic modules for wireless and mobile network simulation, and free from the designing of the bottom of the module’s structure and topological, so that , it can put more efforts on the achievement of the realization of the protocol, speed up the simulation process. At last, it organizes an Ad hoc network, and simulate the Ping instruction, which is always used in the computer network to detect the network’s connectivity, at the same time, it collects Key words Network Simulation OMNeT + + Ad hoc Network 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc171853929 摘 要 PAGEREF _Toc171853929 \h I HYPERLINK \l _Toc171853930 Abstract PAGEREF _Toc171853930 \h II HYPERLINK \l _Toc171853931 第1章 绪论 PAGEREF _Toc171853931 \h 1 HYPERLINK \l _Toc171853932 1.1 课题背景与意义 PAGEREF _Toc171853932 \h 1 HYPERLINK \l _Toc171853933 1.2 本文的主要工作 PAGEREF _Toc171853933 \h 2 HYPERLINK \l _Toc171853934 1.3 本文的组织结构 PAGEREF _Toc171853934 \h 3 HYPERLINK \l _Toc171853935 第2章 OMNeT++基础 PAGEREF _Toc171853935 \h 4 HYPERLINK \l _Toc171853936 2.1 OMNeT++简介 PAGEREF _Toc171853936 \h 4 HYPERLINK \l _Toc171853937 2.2 OMNET++框架 PAGEREF _Toc171853937 \h 6 HYPERLINK \l _Toc171853938 2.2.1 OMNeT++组成 PAGEREF _Toc171853938 \h 6 HYPERLINK \l _Toc171853939 2.2.2 OMNeT++框架 PAGEREF _Toc171853939 \h 7