自蓄热高温空气燃烧的数值研究NumericalStudyonSelf.pdfVIP

自蓄热高温空气燃烧的数值研究 １２ １２ １ １ １ , , 张建军 ，徐今强 ，肖睿 ，秦坤 ，冯自平 1 2 （中科院广州能源研究所，广州 510640 中科院研究生院，北京 100049 ） 摘要 在介绍国内外关于连续式高温空气燃烧技术的基础上，总结了自蓄热连续燃烧的高温空气燃烧技术 的优点。提出了一种新的连续式高温空气燃烧新方案，并以此为基础研制了自蓄热式高温空气燃烧器。用 Fluent 软件对该燃烧器的助燃空气与燃气的不同入口速度情况进行了数值模拟。从模拟的结果得出了有利 于提高炉膛温度、降低氮氧化物排放浓度的气流组织方式。 关键词 连续式高温空气燃烧 自蓄热式燃烧器 数值模拟 NOX 排放 中图分类号： TK16 文献标识码：A Numerical Study on Self-regenerator High Temperature Air Combustion １２ １２ １ １ １ Zhang jianjun , , Xu jinqiang , ,Xiao rui , Qinkun , Feng zipping (1. Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640, China; 2. Graduate School, Chinese Academy of Sciences, Beijing 100049, China) Abstract This work is concerned with numerical simulation of high temperature air combustion self-regenerator burner. The attention is focused on the effectiveness of the inlet speed of high temperature air and the fuel on the temperature field and the NOX by numerical simulation. Consecutive combustion of HTAC and the constructer of self-regenerator have been proposed here. The simulation results indicate that the self-regenerator burner can work well in the industrial furnaces. It is also found that equipping a furnace with a regenerative burner can provide a high saving energy, a large flame volume and a lower emission of NOX . It has been obtained that a lower excess air ratio leads to a low peak temperature and a larger flame volume, thus a lower NOX emission. Keywords consecutive high temperature air combustion; self-regenerative burner