复合特殊管球钻于复合材料钻削之研究.pdf

複合特殊管球鑽 於複合材料鑽削之研究 學生：黃竣捷 指導教授：曹中丞 博士 大華科技大學 機電工程研究所 摘要 鑽孔加工是纖維強化複材層板二次加工中最常使用之製程，從工 業應用經驗顯示，管鑽較麻花鑽有較佳之鑽孔品質。然而管鑽於鑽削 過程中，屑片材料移除是個麻煩。傳統的複合管鑽皆為更改內部鑽頭 的幾何形狀。而本研究旨在改變複合特殊管鑽外型的幾何形狀，以降 低複合特殊管鑽鑽削複合材料時因軸向推力過大的問題。此外，本研 究依鑽削形式、軸向推力與脫層以進行分析探討對碳纖維複合層板的 影響，以改善複合材料鑽削的品質。 關鍵字： 鑽孔 、纖維強化複材層板 、管鑽 、複合管鑽 I Study on the effect of compound coreball-special drill in drilling composite materials Student ：Chun-Chieh Huang Advisor: Dr.Chung-Chen Tsao Institute of Mechatronic Engineering Ta Hwa University of Science and Technology Abstract Drilling is the mostly used secondary machining process of the fiber reinforced composite laminates, while the delamination occurs frequently at the drill exit in the workpiece. In the industrial experiences, core drill shows better drilling quality than twist drill in drilling composite laminates. However, chip removal is a troublesome problem when using the core drill. This research aims to change Compound special-core drills geometry to reduce Compound special-core drills drilling composite materials due to the problem of excessive drilling geometry. In addition, this study according to drilling types, thrust force and delamination analyses on effect of carbon fiber composite materials, to improve the drilling quality of composite materials. Keywords: Drilling, Fiber reinforced composite laminates, core drills, Compound special-core drills II 目錄 中文摘要 I 英文摘要II 目錄 III 圖目錄 V 符號彙編 VIII 第一章 緒論 1 1.1研究背景與目的 1