PROTOCOLSPECIFICATION设备对接协议(doc).docVIP

HUSKY MACHINE OPERATIONS HUSKY HOST INTERFACE PROTOCOL SPECIFICATION This manual describes the interface between a Husky Injection Molding Machine with the Husky Host Interface option and the Host system. An overview of the system and a detailed command set are given. This manual is issued by the Systems Software Group. SPECIFICATION SUBJECT TO CHANGE Husky Injection Molding Systems Ltd. Machine Operations 560 Queen Street South Bolton REVISION RECORD Revision Date Comments 1.00 1994 12 12 Initial Release. 1.01 1995 4 11 Added text data variable support, reformatted. 1.02 1995 5 15 Cleaned up per MD, SPC II and Tandem updates. 1.03 1995 7 28 Restored reference to RFC 1179 for printing. 2.00 1998 4 17 Updated for G-Line, added Event Function, updated variable list, much cleanup. 2.01 1999 10 12 Added Status Function. 2.02 1999 11 08 Change references to “Alarm” to “Cycle Interruption” Contents TOC \o \t Appendix1,1 1. Introduction PAGEREF _Toc464360923 \h 1 2. System Overview PAGEREF _Toc464360924 \h 2 3. Functions PAGEREF _Toc464360925 \h 3 3.1 Host Display Interface PAGEREF _Toc464360926 \h 3 3.2 Sending Machine Set-ups to Host PAGEREF _Toc464360927 \h 3 3.3 Receiving Machine Set-ups from Host PAGEREF _Toc464360928 \h 4 3.4 Read Process Data PAGEREF _Toc464360929 \h 5 3.5 Events PAGEREF _Toc464360930 \h 5 3.6 Cycle Interruptions PAGEREF _Toc464360931 \h 5 3.7 SPC PAGEREF _Toc464360932 \h 6 3.8 Machine Status PAGEREF _Toc464360933 \h 6 3.9 Remote Printing PAGEREF _Toc464360934 \h 6 4. Technical Implementation PAGEREF _Toc464360935 \h 7 4.1 Communications Interface PAGEREF _Toc464360936 \h 7 4.2 Application Interface PAGEREF _Toc464360937 \h 8 4.2.1 Type 1 - Machine Functions PAGEREF _Toc464360938 \h 8 4.2.1.1 Initialize the connection PAGEREF _Toc464360939 \h 11 4.2.1.2 Start of job PAGEREF _Toc464360940 \h 12 4.2.1.3 Languages PAGEREF _Toc464360941 \h 13 4.2.1.4 List process variable PAGEREF _Toc464360942 \h 15 4.2.1.5 Reading process var