自动剥片系统.PDFVIP

自动剥片系统 Automatic breakout solution 07 基本描述GENERAL DESCRIPTION 玻璃种类 浮法玻璃Float, 镀膜玻璃 Kind of glass low-e 玻璃厚度 Min. and Max. thickness for automatic breakout 3 ÷ 8 mm 最小尺寸 400 mm Minimum ‘X’ breakout dimension 最大尺寸 2760 mm Maximum ‘X’ breakout dimension X向工作方式 静态STATIC ‘X’ way of working 1 自动剥片台描述Automatic Breakout Solution Description 皮带传送全自动剥片台，由剥片模块和气浮台构成The automatic breakout solution is made up of two belt conveyors, a breakout unit and an air cushion table. 皮带传送机，全标准化设备，用于剥片系统的玻璃的传送及定位。全金属框架结构。 设备具有一套完成的同步皮带，用于定位期间获得极高的精确度。并且由编码器及 变频器来实现电机变速系统的控制。The belt conveyor, i.e. totally modular machine for transporting and positioning the sheet on the breakout unit, is basically a bodywork made of steel tubing and folded metal sheeting, completed with a set of toothed belts to ensure maximum positioning precision, and with a gear motor controlled by dedicated encoder and inverter. 剥片模块通过气动手臂与下方剥片滚轮的合作，使玻璃切口打开。玻璃厚度在允许 范围内，剥片模块在静态模式下工作。The breakout module is a unit able to breakout glass with thickness in a given range, and is completed with pneumatic arms which, together with the combined action of the lower breakout roller, permit incision opening. The modules can work in a ‘static’ way. 气浮台就是剥片台装配皮带传送玻璃，除X切口外，其余切口可通过剥片棒手动完 成，气垫完成传送、抓取玻璃。The air cushion table (if Bottero S.p.A. supply) is a breakout table provided with belts for traverse transport, breakout bars for manual breakout of all the cuts other than ‘X’ cuts and air cushion for traverse and final piece handling. 输入传输机Input conveyor L= 6900 mm