双螺旋结构螺旋折流板换热器试验研究-高校化学工程学报.PDF

21 4 No.4 Vol.21 2007 8 Journal of Chemical Engineering of Chinese Universities Aug. 2007 1003-9015(2007)04-0547-04 , ( , 710049) Re 9.9 6.15 Nu 14.12 11.72 Nu TK172 TQ051.5 TQ021.3 A Experimental Study of Helical Baffled Heat Exchanger with Double Helical Structure GAO Xiao-dong, FENG Xiao (School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China) Abstract: The shell-side flow pattern in the heat exchanger with helical baffle is quite different from that in the heat exchanger with conventional segment baffle. For the helical baffle structure made up with fan-shaped plates, the construction of double helical baffle arranged in the shell-side of the heat exchanger was proposed. The arrangement of double helical baffle allows setting up more baffles in the shell-side of the heat exchanger and can reduce the leakage in the joint points of the fan-shape plates, both of these cause the shell-side flow more approaching to the plug flow. The heat transfer and pressure drop performances in the shell-side of the heat exchanger constructed with single and double helical baffle separately were studied experimentally. The results show that, when the flow medium in the shell-side is water and under the same Re number, the pressure drop and Nu number in the shell-side of the heat exchanger with double helical baffle are 9.9 and 14.12 higher than that in the shell-side of the heat exchanger with single helical baffle, respectively. When the flow medium in the shell-side is the heavy diesel oil, the pressure drop and Nu number in the shell-side of the heat exchanger with double helical baffle are 6.15 and 11.72 higher