经典PP报告案例.pptxVIP

Screen Check Process Improvement Alvin Zhang 2 The Background 3 Fiber Contamination Abnormal Display No Power on LCD No Power on LCD, and others Customer Complained Because of Screen Problem 4 Prevent Action 5 Set up Screen Check Process to Prevent It The Screen Check Process Charge Test – Cycle Time=55s Reset Test – Cycle Time=96s Insert USB cable, check indicator light and USB logo Open internet input “http://attunite Input password, clickSignin,click about remove USB cable. Total Cycle Time =55s+96s=151s Access menu,set reset,waiting restart. Remove USB cable. After reset click power button, remove battery when shutting down , check IMMEI 6 How The Process Going on? 7 ●There is no any more complain from customer Result Basing Data From August to September ●Total 115 defects captured by the screen check process, around 1000 DPPM ●All defects were captured by the charge test, no any defect relate to the reset test 8 Re-define the screen check process 9 Remove The Reset Test To Reduce Cycle Time The Screen Check Process Charge Test – Cycle Time=65s Reset Test – Cycle Time=0s + 10s Total Cycle Time =55s+0s=65s 10 The Benefit 11 Head Count Reduced, Cost Saving Before After Cost Saving OP/Shift OP/Shift 84,000$/year 12 Thanks