液压传动与气压传动概述.pptVIP

航空在职业技术学院 周青 项目七 液压传动与气压传动 机器组成 一般主要由三部分组成 原动机 原动机 工作机：直接工作部分 机械传动 皮带轮传动 机器组成 一般主要由三部分组成 机器组成 一般主要由三部分组成 机器组成 一般主要由三部分组成 液压千斤顶的工作原理 3，液体流动连续性原理 因为液体不可压缩性，液体流动在同一管道中通过任意两个 截面的流量相等 Notes In order to retract the cylinder once it has completed its stroke, a directional control valve is required to switch the fluid to either end of the cylinder (or to block it when no movement is required). Directional valves are most often sliding spool valves. NOTES NOTES NOTES NOTES NOTES NOTES NOTES NOTES NOTES NOTES NOTES NOTES NOTES NOTES NOTES NOTES NOTES NOTES NOTES NOTES NOTES NOTES NOTES NOTES NOTES Notes In order to retract the cylinder once it has completed its stroke, a directional control valve is required to switch the fluid to either end of the cylinder (or to block it when no movement is required). Directional valves are most often sliding spool valves. Notes In order to retract the cylinder once it has completed its stroke, a directional control valve is required to switch the fluid to either end of the cylinder (or to block it when no movement is required). Directional valves are most often sliding spool valves. Notes In order to retract the cylinder once it has completed its stroke, a directional control valve is required to switch the fluid to either end of the cylinder (or to block it when no movement is required). Directional valves are most often sliding spool valves. Notes In order to retract the cylinder once it has completed its stroke, a directional control valve is required to switch the fluid to either end of the cylinder (or to block it when no movement is required). Directional valves are most often sliding spool valves. Notes In order to retract the cylinder once it has completed its stroke, a directional control valve is required to switch the fluid to either end of the cylinder (or to block it when no movement is required). Directional valves are most often sliding spool valves. Notes In order to retract the cylinder once it ha